WINDOWS CARE AND MAINTENANCE
WINDOWS MAINTENANCE TIP
Our vinyl windows are designed for easy care and minimal maintenance. Regular cleaning of the uPVC frames and glass, along with basic care of the hardware, weatherstripping and drainage holes, helps keep your windows looking great and operating smoothly. Follow these simple window cleaning and maintenance tips from SELA Windows & Doors to care for your vinyl windows throughout the year.
CLEANING WINDOWS GLASS
Quick
Effective
Keeping your window glass clean helps maintain clear views and a well-cared-for appearance. To clean your vinyl window glass, first remove loose dust and debris with a soft cloth. Mix a small amount of mild dish soap with lukewarm water, then gently wash the glass with a soft sponge or microfiber cloth. Remove any soap residue with clean water and use a squeegee or lint-free microfiber cloth for a streak-free finish. Pay attention to edges and corners, and avoid abrasive cleaners or rough scrubbing pads that could scratch the surface. For the best results, clean your windows out of direct sunlight to prevent the solution from drying too quickly.
CLEANING VINYL WINDOW FRAMES
Gentle
Safe
Vinyl window frames are low-maintenance, but occasional cleaning with warm, soapy water will help keep them looking their best. Avoid abrasive tools, high-pressure washing, and harsh chemicals such as bleach or nail polish remover.
Use a mild soap-and-water solution and remove any loose dust or debris first. Gently scrub the frames with a soft brush or sponge, using a small brush for corners and tight areas. Rinse thoroughly and dry with a soft cloth to prevent streaking. For best results, clean the frames twice a year to maintain their appearance and durability.
CLEANING WINDOW SCREENS
Simple
Safe
Regular window screen cleaning helps remove dust, pollen and debris while keeping your screens looking their best. For removable screens, carefully take them out and lay them on a clean, flat surface. Use a soft brush or a vacuum with a brush attachment to remove loose dirt, then gently wash with lukewarm water and mild soap. Rinse with a gentle stream of water and allow the screens to dry completely before reinstalling or storing them. For screens designed to remain in place, gently clean accessible surfaces with a soft brush or damp microfiber cloth. Avoid abrasive cleaners, pressure washers and excessive force, which can damage the mesh. Removing and storing screens during winter can help protect them from snow and ice and make glass cleaning easier, but it does not improve the window’s insulation.
WINDOWS CONDENSATION
Causes
Solutions
Window condensation forms when warm, moist indoor air meets a cold glass surface, especially during winter. Condensation on the inside of your windows often results from high indoor humidity and limited airflow and does not necessarily indicate a window defect or installation problem. To reduce moisture buildup, use bathroom and kitchen exhaust fans, keep air vents clear, open blinds or curtains to improve air circulation, and use a dehumidifier when needed. Wipe away excess moisture promptly to help protect surrounding finishes. Energy-efficient double- or triple-glazed windows can help reduce condensation by keeping the interior glass warmer, but indoor humidity still needs to be managed. Condensation on the outside of the glass can occur naturally, while persistent fog or moisture between the panes may indicate a failed insulated glass seal and should be professionally assessed.
